Model - SF26

The Seafury SF26 Surface Drive has been designed principally for use with planing and semi planing craft up to about 6 Tonnes displacement for a single application. Designed and built to classification standards each Seafury Drive comes complete with its own matched propeller ensuring vibration free operation.

Specifications

Vessel Displacement	Up to 5.5 Tonnes displacement for single SF26 unit application Up to 13 Tonnes displacement for dual SF26 unit application Up to 20 Tonnes displacement for triple SF26 unit application Important Note: Weight to Unit size shown above is indicative only. For more detailed information consult Seafury.
Engine HP-Kw Range Approx.	Nominal rating 150 Kw to 500 Kw (200 - 650 HP) dependant on application.
Propeller Diameter	600 mm (24”) to 660 mm (26”) dependant on application.
Weight	180 kg Approx for Drive Body, steering and rudder (excludes propeller and shafting)
Drive Body	Cast Silicon Bronze (C 87500)
Steering	Twin single-acting Hydraulic Cylinders S/S 316 Steering Arms 2205CG Clevis Nibral (AB2)
Rudder	Single Spade type Nibral (AB2)
Shaft	Fully enclosed 2205 CG S/S inline conventional drive line arrangement.
Bearings	Front and rear water lubricated cutlass bearings.
Seals	Single lip seal arrangement
Propeller	4 - 5 Bladed Surface Propeller Nibral (AB2)
Coupling	The shaft terminates in a tapered and keyed section and a coupling flange is provided to match the desired transmission or coupling.
Drive Line	Fully enclosed inline conventional drive line arrangement.